MattSmith MattSmith - 25 days ago 6
Linux Question

how do you diagnose a kernel oops?

Given a linux kernel oops, how do you go about diagnosing the problem? In the output I can see a stack trace which seems to give some clues. Are there any tools that would help find the problem? What basic procedures do you follow to track it down?


Unable to handle kernel paging request for data at address 0x33343a31
Faulting instruction address: 0xc50659ec
Oops: Kernel access of bad area, sig: 11 [#1]
tpsslr3
Modules linked in: datalog(P) manet(P) vnet wlan_wep wlan_scan_sta ath_rate_sample ath_pci wlan ath_hal(P)
NIP: c50659ec LR: c5065f04 CTR: c00192e8
REGS: c2aff920 TRAP: 0300 Tainted: P (2.6.25.16-dirty)
MSR: 00009032 CR: 22082444 XER: 20000000
DAR: 33343a31, DSISR: 20000000
TASK = c2e6e3f0[1486] 'datalogd' THREAD: c2afe000
GPR00: c5065f04 c2aff9d0 c2e6e3f0 00000000 00000001 00000001 00000000 0000b3f9
GPR08: 3a33340a c5069624 c5068d14 33343a31 82082482 1001f2b4 c1228000 c1230000
GPR16: c60f0000 000004a8 c59abbe6 0000002f c1228360 c340d6b0 c5070000 00000001
GPR24: c2aff9e0 c5070000 00000000 00000000 00000003 c2cc2780 c2affae8 0000000f
NIP [c50659ec] mesh_packet_in+0x3d8/0xdac [manet]
LR [c5065f04] mesh_packet_in+0x8f0/0xdac [manet]
Call Trace:
[c2aff9d0] [c5065f04] mesh_packet_in+0x8f0/0xdac [manet] (unreliable)
[c2affad0] [c5061ff8] IF_netif_rx+0xa0/0xb0 [manet]
[c2affae0] [c01925e4] netif_receive_skb+0x34/0x3c4
[c2affb10] [c60b5f74] netif_receive_skb_debug+0x2c/0x3c [wlan]
[c2affb20] [c60bc7a4] ieee80211_deliver_data+0x1b4/0x380 [wlan]
[c2affb60] [c60bd420] ieee80211_input+0xab0/0x1bec [wlan]
[c2affbf0] [c6105b04] ath_rx_poll+0x884/0xab8 [ath_pci]
[c2affc90] [c018ec20] net_rx_action+0xd8/0x1ac
[c2affcb0] [c00260b4] __do_softirq+0x7c/0xf4
[c2affce0] [c0005754] do_softirq+0x58/0x5c
[c2affcf0] [c0025eb4] irq_exit+0x48/0x58
[c2affd00] [c000627c] do_IRQ+0xa4/0xc4
[c2affd10] [c00106f8] ret_from_except+0x0/0x14
--- Exception: 501 at __delay+0x78/0x98
LR = cfi_amdstd_write_buffers+0x618/0x7ac
[c2affdd0] [c0163670] cfi_amdstd_write_buffers+0x504/0x7ac (unreliable)
[c2affe50] [c015a2d0] concat_write+0xe4/0x140
[c2affe80] [c0158ff4] part_write+0xd0/0xf0
[c2affe90] [c015bdf0] mtd_write+0x170/0x2a8
[c2affef0] [c0073898] vfs_write+0xcc/0x16c
[c2afff10] [c0073f2c] sys_write+0x4c/0x90
[c2afff40] [c0010060] ret_from_syscall+0x0/0x38
--- Exception: c01 at 0xfd98a50
LR = 0x10003840
Instruction dump:
419d02a0 98010009 800100a4 2f800003 419e0508 2f170000 419a0098 3d20c507
a0e1002e 81699624 39299624 7f8b4800 419e007c a0610016 7d264b78
Kernel panic - not syncing: Fatal exception in interrupt
Rebooting in 1 seconds..

Answer

An Oops gives a bunch of information useful in diagnosing a crash. It starts with the address of the crash, the reason ("access of bad area") and the contents of the registers. The call trace answers the question "how did we get here". The first item in the list happened most recently. Working backwards, an interrupt happened (do_IRQ) because the Atheros WiFi adapter received a packet (ath_rx_poll). The routine passed it to the generic WiFi code (ieee80211_input) which in turn passed it up to the network stack (netif_receive_skb).

To figure out the exact code causing the problem, you can run

gdb /usr/src/linux/vmlinux

and then disassemble the function in question, which might be mesh_packet_in(). Might, because the faulting instruction (0xc50659ec) looks to be outside of mesh_packet_in() (0xc5065f04). You might also try the gdb command

(gdb) info line 0xc50659ec

to figure out which function contains this address.

Comments